Two Rail Fence

Material Specifications

Rigid PVC Hompolymer compound. Modified for cold weather impact retention.

Cell Classification- ASTM D-4216 1-43332-32-0000
Cell Classification- ASTM D-1784 14344B

Typical values:
ASTM D256 Izod Impact (Ft. lbs./inch notch)
23 degree C-5.0 0 degree C-2.0
ASTM D638 Tensile Strength 6,500 psi
ASTM D638 Tensile Modulus 545,000 psi*
ASTM D648 Deflection Temp. 71 degree C
ASTM D4226 Drop Dart Procedure A 2.51 (in.-lb/mil)
ASTM D4226 Drop Dart Procedure B 4.50 (in.-lb/mil)
ASTM D695 Compressive (Yield) Strength 8,780 psi
ASTM D696 Thermal Expansion 4.4 x 10-5 in./in./degree F
ASTM D732 Shear Strength 6,780 psi
ASTM D790 Flexural Strength 11,400 psi
* Tensile Modulus should be used for design purposes with caution. Values
listed are representative for short term loading (such as livestock pushing
on fence). The long term creep characteristics under continuous loading
are unknown.

Standard Specifications

For Rail Fence (Conforms to ASTM F964)

Fence Rails
TxW: 1 1/2 x 5 1/2″; 2″ x 6″, 2 7/8″round
Length: 16′

Fence Posts
TxW: 5″ x 5″; 5″ O.D. round
Length: 6′,7′,8′

TxW: 5″ x 5″; 5″ O.D. round

Fence Post Bracket
TxW: 1 1/2″ x 5 1/2″; 2″ x 6″

These standard measurements apply to both 1-1/2″ x 5-1/2″ rails and 2″ x 6″ rails.

*On all Country Estate® rail fencing, the top rail is mounted 2″ from the top of the post.

*On two-rail and three-rail fencing, there is 11 inches between rails.

*On four-rail fencing, there is 9 inches between rails.

Radius corner sections also available